thank you Mr. President

broncoman
Full Member

yea this too is moab

Posts: 171

thank you Mr. President Feb 22, 2008 0:19:10 GMT -5

Quote

Post by broncoman on Feb 22, 2008 0:19:10 GMT -5

For making a special day to go wheelin.

a common view for drivers of old jeeps

there is no such thing as a bad day wheelin'

gold bar rim trail

we had some time left so we went to visit Gemini Bridges

on the edge but not comfortable

came out the back way . very muddy and slick

Last Edit: Feb 22, 2008 0:19:39 GMT -5 by broncoman

'69 bronco , 351w, t18 trans, t-case mod. for 2 low, locked front and rear 4,11s, 4"wild horse front custom rear susp. lift, 1" body lift,custom front and rear bumpers and rock bars, custom built roll cage,12.50 35 procomp x terain on chrome 15x10

redrock New Member Posts: 9	thank you Mr. President Feb 22, 2008 11:09:32 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by redrock on Feb 22, 2008 11:09:32 GMT -5 That was a fun trip. A little nerve racking taking a rented jeep up and down some of those ledges... Fun stuff, looking forward to Easter...
	Last Edit: Feb 22, 2008 11:11:45 GMT -5 by redrock

greenjeep Administrator All Moab, All the Time! Posts: 1,043	thank you Mr. President Feb 22, 2008 13:36:37 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by greenjeep on Feb 22, 2008 13:36:37 GMT -5 broncoman said: a common view for drivers of old jeeps It was just my t-case linkage popped out, a few seconds and we were on our way.
	1984 CJ-7, TJ frame, TBI 401 AMC V-8, T-400, Dana 300, Dana 60 front, 14 bolt rear, 5.13s, Detroits, 5.5" RE Long Arm kit, 3" body, 38.5x14.50 SXs, Military H1 beadlocks, Warn XD9000i, Hydro assist, etc. 1968 Jeepster Commando, EFI 4.3 V-6, T-700R4, NP241, Dana 44s, 4.88s, rear Detroit, SOA w/YJ leafs, 35x12.50 Mudders

timb
Junior Member

Posts: 53

thank you Mr. President Feb 22, 2008 15:02:21 GMT -5

Quote

Post by timb on Feb 22, 2008 15:02:21 GMT -5

You guys are so lucky, all I did was work in the shop prepping the jeep while it snowed. Of course if I was there I would never get the little things fixed on my jeep because I would be out wheeling!

Installed my on-board welder only to find it don't work - so uninstalled it. Not a real productive day.

2bigtj
New Member

Posts: 47

thank you Mr. President Feb 24, 2008 23:54:35 GMT -5

Quote

Post by 2bigtj on Feb 24, 2008 23:54:35 GMT -5

I have to say that I have not had that much fun wheeling in a long time...we did not do anythng real hard, but I had my girls out, with Grandma and grandpa, my brother and his wife were there, and we just had a great time. Oh yeah Dave was fun as well ;D. That was the first time I had ever been to the bridges (scared the crap out of me). Cant wait to get down there when it is dry, it took 15 dang bucks to clean the jeep off after that day.

Last Edit: Feb 24, 2008 23:55:42 GMT -5 by 2bigtj

greenjeep Administrator All Moab, All the Time! Posts: 1,043	thank you Mr. President Feb 25, 2008 9:54:10 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by greenjeep on Feb 25, 2008 9:54:10 GMT -5 2bigtj said: Oh yeah Dave was fun as well ;D. It was fun, just relaxing and a good time!
	1984 CJ-7, TJ frame, TBI 401 AMC V-8, T-400, Dana 300, Dana 60 front, 14 bolt rear, 5.13s, Detroits, 5.5" RE Long Arm kit, 3" body, 38.5x14.50 SXs, Military H1 beadlocks, Warn XD9000i, Hydro assist, etc. 1968 Jeepster Commando, EFI 4.3 V-6, T-700R4, NP241, Dana 44s, 4.88s, rear Detroit, SOA w/YJ leafs, 35x12.50 Mudders

Post by broncoman on Feb 22, 2008 0:19:10 GMT -5

Post by redrock on Feb 22, 2008 11:09:32 GMT -5

Post by greenjeep on Feb 22, 2008 13:36:37 GMT -5

Post by timb on Feb 22, 2008 15:02:21 GMT -5

Post by 2bigtj on Feb 24, 2008 23:54:35 GMT -5

Post by greenjeep on Feb 25, 2008 9:54:10 GMT -5